Routers y Switches

Routers y Switches

Filtros activos

  • REF: CISCO1760A

    Fabricante: Cisco
    Modelo: Cisco 1700 Series ( Cisco 1760 )

    Condición: El Router se entrega en funcionamiento y presenta el desgaste habitual de un producto usado.

    Consumo energético: 50W

    Garantía: 24 meses

    -----------------------------------------------------------------------------------------

    Consola:

    System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
    TAC Support: http://www.cisco.com/tac
    Copyright (c) 2003 by cisco Systems, Inc.
    C1700 platform with 98304 Kbytes of main memory

    program load complete, entry point: 0x80008000, size: 0xe55414
    Self decompressing the image : ###################################################### [OK]


    Smart Init is enabled
    smart init is sizing iomem
    ID MEMORY_REQ TYPE
    MainBoard 0X00027A80 1760
    0X000F3BB0 public buffer pools
    0X00211000 public particle pools
    0X002E 0X0001B800 Card in slot 0
    TOTAL: 0X00347E30

    If any of the above Memory Requirements are
    "UNKNOWN", you may be using an unsupported
    configuration or there is a software problem and
    system operation may be compromised.



    Allocating additional 7918261 bytes to IO Memory.
    PMem allocated: 89304859 bytes

  • Cisco 7604 Chasis...

    Precio 68,00 €

    REF: CISCO7604A

    Fabricante: Cisco
    Modelo: Cisco 7604

    Tarjetas incluidas:

    Dos unidades de WS-SUP720-3B
    Una unidad de FAN-MOD-4HS
    Dos unidades de PWR-2700-AC/4

    Caracteristicas:

    Physical specifications: 5RU (8.75-in.) chassis, 4-slot chassis, Dimensions (H x W x D): 8.75 x 17.5 x 21.75 in. (22.225 x 44.45 x 55.245 cm), Weight: 40 lb
    Power requirements: 110 to 240 VAC, –48 to –60 VDC, Mean time between failure (MTBF): 7 years for system configuration.

    Environmental conditions: Operating temperature: 32 to 104°F (0 to 40°C), Storage temperature: –4 to 149°F (–20 to 65°C), Relative humidity, operating: 10 to 85% noncondensing, Relative humidity, storage: 5 to 95% noncondensing, Operating altitude: –500 to 6500 ft

    Regulatory compliance:

    EMC: FCC Part 15 (CFR 47) Class A, ICES-003 Class A, EN55022 Class A, CISPR22 Class A, AS/NZS 3548 Class A, VCCI Class A, EN55024, ETS300 386, EN50082-1, EN61000-3-2, EN61000-3-3,

    Regulatory Compliance: UL 60950, IEC 60825-1, -2, IEC 60950, EN 60950, EN 60825-1, -2, CAN/CSA-C22.2 No. 60950-00, AS/NZS 3260-1993, 21CFR1040.

    Safety and environmental standards compliance: GR-63-Core NEBS Level 3 (post-FCS), GR-1089-Core NEBS Level 3 (post-FCS), ETSI 300 019 Storage Class 1.1, ETSI 300 019 Transportation Class 2.3, ETSI 300 019 Stationary Use Class 3.1

    Minimum software release: Cisco IOS® Software Release 12.2.18SXE

    Consumo energético: 2700W

    Condición: el Switch se entrega en funcionamiento y presenta el desgaste habitual de un producto usado.

    Garantía: 24 meses

  • REF: Cisco4506

    Fabricante: Cisco
    Modelo: Cisco 4506

    Tarjetas incluidas:

    Dos unidades de Power Supply
    Una unidad de WS-X4515 Supervisor Engine IV
    Cuatro unidades de WS-X4306-GB

    Consola:


    **********************************************************
    * *
    * Welcome to Rom Monitor for WS-X4515 System. *
    * Copyright (c) 1999-2004 by Cisco Systems, Inc. *
    * All rights reserved. *
    * *
    **********************************************************

    Rom Monitor Program Version 12.2(20r)EW1
    Supervisor: WS-X4515 Chassis: WS-C4506
    Hardware Revisions - Board: 2.7 CPLD: 29 Dagobah: 95


    MAC Address : 00-11-21-71-c9-d2
    Ip Address : Not set.
    Netmask : Not set.
    Gateway : Not set.
    TftpServer : Not set.
    Main Memory : 512 MBytes



    ***** The system will autoboot in 5 seconds *****


    Type control-C to prevent autobooting.
    . . . . .

    ******** The system will autoboot now ********


    config-register = 0x2102
    Autobooting using BOOT variable specified file.....

    Current BOOT file is --- bootflash:cat4500-entservicesk9-mz.122-40.SG.bin

    Rommon reg: 0x5F004380
    ###########
    k2diags version 5.2_b

    prod: WS-X4515 part: 73-9254-02 serial: JAE090867FP


    Power-on-self-test for Module 1: WS-X4515
    Port/Test Status: (. = Pass, F = Fail, U = Untested)
    Reset Reason: PowerUp



    Cpu Subsystem Tests ...
    seeprom: . temperature_sensor: . eobc: .

    Port Traffic: L2 Serdes Loopback ...
    0: . 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: .
    12: . 13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: .
    24: . 25: . 26: . 27: . 28: . 29: . 30: . 31: .


    Port Traffic: L2 Asic Loopback ...
    0: . 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: .
    12: . 13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: .
    24: . 25: . 26: . 27: . 28: . 29: . 30: . 31: .


    Port Traffic: L3 Asic Loopback ...
    0: . 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: .
    12: . 13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: .
    24: . 25: . 26: . 27: . 28: . 29: . 30: . 31: .


    Switch Subsystem Memory ...
    1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: . 12: .
    13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: . 24: .
    25: . 26: . 27: . 28: . 29: . 30: . 31: . 32: . 33: . 34: . 35: . 36: .
    37: . 38: . 39: . 40: . 41: . 42: . 43: . 44: . 45: . 46: . 47: . 48: .
    49: . 50: . 51: . 52: . 53: . 54: . 55: .


    Module 1 Passed


    Exiting to ios...

    Rommon reg: 0x5F000380
    ############################################
    Restricted Rights Legend

    Use, duplication, or disclosure by the Government is
    subject to restrictions as set forth in subparagraph
    (c) of the Commercial Computer Software - Restricted
    Rights clause at FAR sec. 52.227-19 and subparagraph
    (c) (1) (ii) of the Rights in Technical Data and Computer
    Software clause at DFARS sec. 252.227-7013.

    cisco Systems, Inc.
    170 West Tasman Drive
    San Jose, California 95134-1706



    Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-ENTSERVICESK9-M), Version 12.2(40)SG, RELEASE SOFTWARE (fc2)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2007 by Cisco Systems, Inc.
    Compiled Wed 07-Nov-07 18:00 by prod_rel_team
    Image text-base: 0x10000000, data-base: 0x11ADF0B8

    Testing packet buffer memory: 00000000000000512001024001536002048002560003072003584004096004608005120005632006144006656007168007680008192008704009216009728010240010752011264011776012288012800013312013824014336014848015360015872016384016896017408017920018432018944019456019968020480020992021504022016022528023040023552024064024576025088025600026112026624027136027648028160028672029184029696030208030720031232031744032256032768033280033792034304034816035328035840036352036864037376037888038400038912039424039936040448040960041472041984042496043008043520044032044544045056045568046080046592047104047616048128048640049152049664050176050688051200051712052224052736053248053760054272054784055296055808056320056832057344057856058368058880059392059904060416060928061440061952062464062976063488064000064512065024065536..done
    All packet buffers passed.

    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.

    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

    If you require further assistance please contact us by sending email to
    export@cisco.com.

    cisco WS-C4506 (MPC8245) processor (revision 7) with 524288K bytes of memory.
    Processor board ID FOX0909017D
    MPC8245 CPU at 333Mhz, Supervisor IV
    Last reset from PowerUp
    1 Virtual Ethernet interface
    26 Gigabit Ethernet interfaces
    403K bytes of non-volatile configuration memory


    Press RETURN to get started!

    Consumo energético máximo por ranura: 1500W

    Condición: el Switch se entrega en funcionamiento y presenta el desgaste habitual de un producto usado.

    Garantía: 24 meses

  • REF: WIC1ADSL

    Fabricante: Cisco
    Modelo: WIC-1ADSL
    Forma: Tarjeta para WIC Cisco
    Cantidad de puertos: 1 Unidad ADSL
    Protocolo: Ethernet.
    Compatibilidad: Cisco

    Condición: El Switch se entrega en funcionamiento y presenta el desgaste habitual de un producto usado.

    Garantía: 24 meses

  • Ref: NOKIA380

    Marca: Nokia

    Modelo: IP380

    Tipo de Dispositivo: Firewall

    Tamaño: 1RU - 19inch
    Interfaces:

    6 - LAN Interfaces 10/100 Ethernet ports

    1 - PMC hot-swappable NIC slot

    2 - PCMCIA Interfaces

    1 - PMCslot for a VPN accelerator

    Memoria: 1GB

    Consumo energético: 230W/A

    Estado del artículo: Usado

    Garantía: 24 meses

  • REF: FOUNDRY

    Fabricante: Foundry
    Modelo: FCSLB16
    Información adicional:
    Ports: 16-port 10/100Base-TX (RJ45) with one expansion slot.
    Switching capacity: 3.6 Gbps

    Consumo energético (máximo): 220W/A

    Garantía: 24 meses

  • REF: SERVERIRON450

    Fabricante: Foundry
    Modelo: ServerIron 450 (8450)
    Tarjetas:
    WSM7 - Mgnt VII ( 1 Unidad )
    J-B16Gx - MGBIC Jetcore ( 1 Unidad ) - 2 Unidades FTLF8519P2BCA

    J-B16Gc - GC - Jetcore ( 1 Unidades )
    Power Supply ( 2 Unidades )
    Features:
    The Foundry ServerIron 450 Web Switch is a high performance layer 4-7 switch, combining a rich set of application intelligence to deliver high availability, security, and scalability for mission critical applications and server farms.
    The ServerIron 450 uses innovative security features and high performance architecture to protect critical applications and servers from multi-gigabit wire-speed Denial of Service (Dos) attacks, while supporting a comprehensive set of load balancing and layer 7 switching features to build scalable and highly available applications.

    Consumo energético: 550W

    Condición:el Switch se entrega en funcionamiento y presenta el desgaste habitual de un producto usado.

    Garantía: 24 meses

  • REF: J9019A

    Fabricante: HP
    Modelo: J9019A - HP Procurve Switch 2510-24
    Puertos disponibles: 24 RJ-45 10/100
    Puertos Gigabit: 2 Unidades 10/100/1000-T or mini-GBIC connectivity
    Routing/switching capacity: 8.8Gbps
    Throughput: up to 6.5 million pps (64-byte packets)
    Dimensiones de rack: 19 in. Rack. (Se incluyen las abrazaderas)
    Comunicaciones: General Protocols: IEEE 802.1p Priority

    Consumo energético: 515W

    Garantía: 24 meses

  • REF: EVOFSH24

    Fabricante: Ovis Link
    Modelo: EVO FSH24

    Funciones avanzadas:
    El EVO-FSH24 está equipado con la función Auto MDI/MDI-X que elimina cualquier necesidad de cables cruzados.

    Seguridad de Transmisión Flow-Control:
    El mecanismo Flow-Control previene una posible sobrecarga del flujo de información, asegurando una alta fiabilidad en la transmisión de los paquetes.

    Características técnicas/especificaciones:

    Estándar:
    IEEE 802.3 10Base-T Ethernet.
    IEEE802.3u 100BaseTX Nway Auto-negociación.
    IEEE802.3x Flow Control para modo Full Duplex y Back-Pressure para Half-Duplex

    Número de puertos:
    24 puertos RJ45 10/100 Mbps. Auto-Sensing.

    Método de transmisión: Store and Forward.
    Backbone: 4.8 Gbps.
    Buffer de memoria de 4 Mb.
    Memoria de 4 K para direcciones MAC.
    Completos LED´s para diagnosticar rápida y
    fácilmente el funcionamiento de la red.

    Tamaño: 440x177x44 mm.

    Fuente de alimentación: Interna 90~240 VAC, 50 ~ 60 Hz, 0.6 A, 20 W. max.

    Cumple UL, CUL, TUV, CE.
    Entorno:
    Temperatura de funcionamiento: de 0º a 50
    Temperatura de almacén: de -20º a 125º
    Humedad en funcionamiento: de 10 % a 90 funcionamiento.
    Humedad en almacén: de 5 % a 90 %.

    Consumo energético: 20 W

    Estado del artículo: el switch se entrega en funcionamiento y presenta el desgaste habitual de un producto usado.

    Garantía: 24 meses

  • REF: BROCADE5100

    Fabricante: Brocade
    Modelo: NA-5120-0008

    Características:

    Cabling Type: Fiber optic
    Subcategory: Fibre Channel and SAN
    Type: Switch
    Connectivity Technology: Wired
    Data Link Protocol: 8Gb Fibre Channel
    Features: Trunking, Full duplex capability, Auto-sensing per device, ISL support, Manageable, Firmware upgradable
    Ports Qty: 24
    Remote Management Protocol: SNMP 1, SNMP 3, HTTPS, HTTP, Telnet
    Data Transfer Rate: 8.5 Gbps

    INTERFACE PROVIDED
    Type: Management, Management, USB, Network
    Interface: Ethernet 10Base-T/100Base-TX, RS-232, 8Gb Fibre Channel
    Qty: 1, 1, 1, 24
    Connector Type: RJ-45, RJ-45, LC

    CHASSIS
    Installed Devices / Modules: Qty 24
    Supported Devices / Modules: Qty 40

    Consola:

    The system is coming up, please wait...


    U-Boot 1.1.3 (May 4 2012 - 08:34:20)

    CPU: AMCC PowerPC 440EPx Rev. A at 660 MHz (PLB=132, OPB=66, EBC=33 MHz)
    No Security/Kasumi support
    I2C boot EEPROM enabled
    Bootstrap Option G - Boot ROM Location I2C (Addr 0x54)
    Internal PCI arbiter enabled, PCI async ext clock used
    32 kB I-Cache 32 kB D-Cache
    Board: Spirit
    I2C: ready
    DRAM: Initializing DDRSDRAM
    DDR Init: speed = 132000002
    DQS calibration - Window detected:
    max_passing_cases = 56
    wr_dqs_shift = 95
    dll_dqs_delay_X = 31
    dll_dqs_delay_X window = 4 - 59
    DDR0_09=0x00011d5f
    DDR0_22=0x00267f0b
    DDR0_17=0x1f005c00
    DDR0_18=0x1f1f1f1f
    DDR0_19=0x1f1f1f1f
    ECC Enabling DONE
    512 MB
    POST RAM test disabled.
    Now running in RAM - U-Boot at: 1fb2f000
    trap_init : 0x0
    system inventory subsystem initialized
    FLASH: Spirit CFI Flash Driver Initialized
    4 MB
    ATA interface setup: io_base=0xf8f00000, port=0x3e0, ctl=0x7ec
    PCI:
    Skip our host bridge
    00 07 1657 0010 0280 18
    In: serial
    Out: serial
    Err: serial
    Net:

    Checking system RAM - press any key to stop test

    Checking memory address:

    System RAM test using Default POST RAM Test succeeded.

    set_bootstatus: BS_LOAD_OS, platform_idx = 3

    Type run flash_nfs to mount root filesystem over NFS

    Hit ESC to stop autoboot:
    Map file at LBA sector 0x8c0df
    ## Booting image at 00400000 ...
    Image Name: Linux-2.6.14.2
    Image Type: PowerPC Linux Multi-File Image (uncompressed)
    Data Size: 4269595 Bytes = 4.1 MB
    Load Address: 00000000
    Entry Point: 00000000
    Contents:
    Image 0: 3190918 Bytes = 3 MB
    Image 1: 1078663 Bytes = 1 MB
    ## Current stack ends at 0x1FAEDBE8 => set upper limit to 0x00C00000
    ## initrd at 0x0070B0D4 ... 0x0081265A (len=1078663=0x107587)
    Loading Ramdisk to 1f9e5000, end 1faec587 ... OK
    initrd_start = 1f9e5000, initrd_end = 1faec587
    ## Transferring control to Linux (at address 00000000) ...
    Installing Linux 2.6 Kernel
    Attempting to find a root file system on hda1...

    INIT: version 2.78 booting

    Bypassing firmware validation.

    INIT: Entering runlevel: 3

    Starting Fabric OS Services...
    FIPS off, RRD...
    Found 1(threshold 5) abnormal reboots within 3000 seconds window(threshold)

    rscmon_service: started thread!
    rscmon_service: started thread!
    sys_chip_init: class 0 max 24 Done
    ethsw_ha_enabled = 1
    uptime: 4293889278

    Consumo de energía: Consumo nominal del sistema 84 vatios máx. 91 vatios

    Garantía: 24 meses

  • REF: CK721

    Fabricante: Johnson Controls
    Modelo: CK721

    Specifications

    The CK721 is an advanced, intelligent network access controller capable of handling high volume, hig

    The CK721 is an advanced, intelligent network access controller capable of handling high volume, high-speed traffic with host security management systems. Easily integrated with any reader via Fiber Optic or UTP Cat-5E tranmission and its P2000 software retains many of the same capabilities as others and can be programmed remotely or through its own interface. It allows you to intergrate with any other sub system with high-level interfacing.

    Made from Johnson Controls U.S.A.

    1. Up to 16 readers per panel.
    2. Embedded 32 bit processor.
    3. 32MB flash memory.
    4. 10/100Base-T network or Fiber Optic connection.
    5. DB9 port for configuration, commissioning and service maintenance.
    6. 32MB memory for 100,000 cardholders.
    7. Accepts up to 20-digit badge numbers.
    8. 12 facility codes per reader (192 per panel).
    9. 40 Holidays.
    10. 64 Time zones.
    11. 8 Access group/time zone pairs per badge.
    12. Modem connection allows for additional redundancy features (CK721M only).
    13. Wiegand, proximity, magnetic stripe, barium ferrite, smart card, most biometric readers and bar code card technologies are supported (custom engineered formats can also be accepted).
    14. Time and attendance.
    15. Alarm notification

    Consumo energético: 330W

    Condición: El artículo se entrega en funcionamiento y presenta el desgaste habitual de un producto usado.

    Garantía: 24 meses

  • REF: RDR2S

    Fabricante: Johnson Controls
    Modelo: S300-DIN-RDR2S

    Description
    The S300-DIN-RDR2S module supports one or two doors per
    module. It uses standard RS-485 communications and can interface
    with the following controllers:
    CK722
    CK721-A
    CK721
    CK720/CK705
    The S300-DIN-RDR2S, also referred to as the RDR2S, provides the
    ability to configure supervised 4-state inputs and unsupervised
    2-state inputs. A total of 10 inputs can be configured as supervised 4-
    state inputs (normally open or normally closed), or 2-state inputs.
    When interfacing to a single door, the unused points can be
    configured as general purpose input/output (I/O) points, possibly
    eliminating the need to purchase additional I/O modules for certain
    installations.
    The RDR2S provides power for card readers and door locking
    hardware

    Features
    2-state (unsupervised) or 4-state (supervised) inputs –
    Unsupervised inputs report either open or closed. Supervised
    inputs provide two additional states that indicate tampering to an
    external device.
    Support of RS-485 bus communications at 9600 or 19200
    baud – Improved performance with improved RS-458 bus polling
    algorithm.
    Easy installation – Modules be mounted on a flat surface, DIN
    rail, or in available UL Listed enclosures.
    Expandable modular design – RDR2S modules can be
    connected together via RS-485.
    Agency listing – The RDR2S is UL294 listed.

    Operation
    The RDR2S provides the following connections when configured to
    control one or two doors:
    Inputs – Request to exit devices, door position contacts, and
    readers (PIN, card or biometric)
    Outputs – Electric locking mechanisms, such as a strike, and
    shunt alarm
    Note: The RDR2S does not support 1-wire Wiegand signal or matrix
    (row/column) keypads. Readers requiring these connection types are
    still supported by the RDR2.
    Power Requirements
    The RDR2S requires 24 VDC input power and can draw as much as
    1.5 amps (depending on the power requirements of the connected
    devices). The RDR2S also requires a 2-wire RS-485 connection back
    to the controller.
    The RDR2S can provide 5, 12, or 24 VDC to the reader

    Consumo energético: 24VDC

    Garantía: 24 meses

  • REF: IBM2498B80A

    Fabricante: IBM
    Modelo: 2498-B80 ( SAN80B-4 )

    Puertos activos: 80 Puertos
    Fuentes de alimentación: 2 Unidades instaladas.
    SW SFPS: Incluye 80 unidades de 4Gb SW Brocade 57-1000013-01

    El equipo a sido de rack´s en funcionamiento y esta en perfecto estado. El Switch requiere de licencia a gestionar con el fabricante (cualquier duda consultar con el vendedor)

    Condición: el Switch se entrega en funcionamiento.


    Garantía: 24 meses


    Especificaciones:

    * 8 Gbps FC interfaces 1, 2, 4, and 8 Gbps auto-sensing FC ports
    * Universal ports self-configure as E, F, M, or FL ports, and EX Ports. EX ports are activated on a per-port basis with the optional Integrated Routing license
    * Unicast, multicast (255 groups), and broadcast data traffic types are supported
    * ISL Trunking allows up to eight ports (at 1, 2, 4, or 8 Gbps speeds) between a pair of switches to be combined to form a single, logical ISL with a speed of up to 64 Gbps (128 Gbps full duplex) for optimal bandwidth utilization and load balancing
    * Dynamic Path Selection optimizes fabric-wide performance and load balancing by automatically routing data to the most efficient available path in the fabric
    * Extended distance support enables full performance for native FC extension with support of up to 3000 km for native FC
    * Small Form-Factor Pluggable (SFP) optical transceivers support any combination of Shortwave (SW), Longwave (LW), and Extended Longwave (ELW) optical media on a single switch
    * Fabric OS delivers distributed intelligence throughout the network and enables a wide range of value-added applications
    * Optional value-added software offerings
    * Utilization of the EZSwitchSetup wizard, which makes SAN configuration a three-step point-and-click task
    * Extensive diagnostics and system-monitoring capabilities enhance RAS

    Consumo energético: 84W típico, 91W máximo.

  • REF: IBM2498B80B

    Fabricante: IBM
    Modelo: 2498-B80 ( SAN80B-4 )

    Puertos activos: 80 Puertos
    Fuentes de alimentación: 2 Unidades instaladas.
    SW SFPS: Incluye 80 unidades de 8Gb SW Brocade 57-1000117-01

    El equipo a sido de rack´s en funcionamiento y esta en perfecto estado. El Switch requiere de licencia a gestionar con el fabricante (cualquier duda consultar con el vendedor)

    Condición: el Switch se entrega en funcionamiento.

    Consumo energético: 91W 

    Garantía: 24 meses

    Especificaciones:

    * 8 Gbps FC interfaces 1, 2, 4, and 8 Gbps auto-sensing FC ports
    * Universal ports self-configure as E, F, M, or FL ports, and EX Ports. EX ports are activated on a per-port basis with the optional Integrated Routing license
    * Unicast, multicast (255 groups), and broadcast data traffic types are supported
    * ISL Trunking allows up to eight ports (at 1, 2, 4, or 8 Gbps speeds) between a pair of switches to be combined to form a single, logical ISL with a speed of up to 64 Gbps (128 Gbps full duplex) for optimal bandwidth utilization and load balancing
    * Dynamic Path Selection optimizes fabric-wide performance and load balancing by automatically routing data to the most efficient available path in the fabric
    * Extended distance support enables full performance for native FC extension with support of up to 3000 km for native FC
    * Small Form-Factor Pluggable (SFP) optical transceivers support any combination of Shortwave (SW), Longwave (LW), and Extended Longwave (ELW) optical media on a single switch
    * Fabric OS delivers distributed intelligence throughout the network and enables a wide range of value-added applications
    * Optional value-added software offerings
    * Utilization of the EZSwitchSetup wizard, which makes SAN configuration a three-step point-and-click task
    * Extensive diagnostics and system-monitoring capabilities enhance RAS

  • REF: SAVAM2

    Marca: Cisco
    Modelo: SA-VAM2+ / 73-9571-06 A0
    Tipo de dispositivo: VPN Acceleration Module
    S/N: JAB110801BB

    The Service Adapter VPN Acceleration Module 2 (SA-VAM2) is a single-width port adapter supported on the Cisco 7301 router and the Cisco 7200 series routers with the network processing engine 225 (NPE-225), 400 (NPE-400), G1 (NPE-G1), and the Network Services Engine (NSE-1) services accelerator. An SA-VAM2 provides hardware-assisted tunneling and encryption/compression services for Virtual Private Network (VPN) remote access, site-to-site intranets, and extranet applications, including security, quality of service (QoS), firewall and intrusion detection, and service-level validation and management. The SA-VAM2 offloads IPSec processing from the main processor to permit resources on the processor engines for other task

    Estado del artículo: el artículo es usado y en buen estado de funcionamiento.

    Garantía: 24 meses

  • CISCO Catalyst 3750 (WS-C3750-24PS-S) 24 Puertos 10/100 POE + 2 SFP   

    Fabricante: Cisco
    Modelo: WS-C3750G-24PS-S

    Performance:

    Brand: Cisco

    MPN: WS-C3750-24PS-S

    GTIN: 0692754117006, 0692752583537

    UPC: 5051749144031, 0746320812496, 0882658330544

    Model: 3750-24PS

    Product Key Features

    Ethernet Technology: Fast Ethernet (100-Mbit/s), Ethernet, Gigabit Ethernet (1000-Mbit/s)

    Type: Catalyst Switch

    Dimensions

    Weight: 16lbs.

    Depth: 11.8in.

    Height: 1.7in.

    Width: 17.5in.

    Additional Product Features

    Data Transfer Rate: 32000Mbps

    Power Consumption Operational: 495W

    Power Source: AC 120/230V (50/60Hz)

    Power over Ethernet (PoE): Yes

    RAM Memory: 128MB

    Power Supply: Power Supply-Redundant-Plug-In Module, Power Supply-Internal

    MAC Address Table Size: 12k Entries

    OTHER Features: Hot swap module replacement, layer 3 switching, layer 2 switching, dynamic IP address assignment , DHCP support, power over Ethernet (PoE), auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, Broadcast Storm Control, High Availability, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), PoE+, Per-VLAN Spanning Tree Plus (PVST+), Flow control, full duplex capability, layer 3 switching, auto-sensing per device, IP-routing, DHCP support, power over Ethernet (PoE), auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, stackable, IPv6 support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS)

    Switching Protocol: Ethernet

    Ports Quantity: 24

    Compatibility: PC

    Min Operating Temperature: 32 ˚F

    MAX Operating Altitude: 9.84ft.

    Routing Protocol: Static IP Routing, Igmp, Ripng, Rip-1, Rip-2, Hsrp, Eigrp

    Form Factor: Rack-Mountable

    Networking Type: Switch

    MAX Operating Temperature: 113 ˚F

    Enclosure Type: Rack-Mountable-1U

    Remote Management Protocol: Cli, Ftp, Ssh, Tftp, Rmon 1, Snmp 1, Rmon 3, Rmon 2, Rmon 9, Snmp 3, Snmp 2, Telnet, Snmp 2C

    Interfaces: 1X Management-Rs-232-R&J Enterprises-45, 1X Management-Console-R&J Enterprises-45 Female, 24 X Network / Power-10base-100base-Texas-R&J Enterprises-45 Female, 24 X Network / Power-10base-100base-1000base-T-R&J Enterprises-45, 1X USB-4 Pin USB Type A, 1X Management-Ethernet 10base-T/100base-Texas-R&J Enterprises-45, Network Stack Device, 2X Network Stack Device, 1X Management-Console-Mini-USB Type B

    Humidity Range Operating (Range): 10-85%

    Flash Memory: 256MB, 16MB Flash, 128MB Flash

    Rack Mounting Kit: Optional

    Status Indicators: Port Status, Link Activity, Port Transmission SPEED, Port Duplex Mode, Status, Port Status, Link Activity, Port Transmission SPEED, Port Duplex Mode, Power, System

    Connectivity Technology: Wired

  • Cisco 2960S "WS-C2960S-48LPS-L" 48 GigE PoE 370W, 4 x SFP

    Fabricante: Cisco
    Modelo: WS-C2960S-48LPS-L

    Performance:

    Stackable: Yes

    Form factor: 1U

    Switch type: Managed

    Basic switching RJ-45 Ethernet ports quantity: 12

    Full duplex: Yes

    MAC address table: 12000 entries

    Maximum data transfer rate: 1 Gbit/s

    Management protocols: SNMP 1, SNMP 2, RMON 2, SNMP, RMON, Telnet, SNMP 3

    Data link protocols: Gigabit Ethernet

    Internal memory: 128MB

    Power consumption (typical): 120 W

    Operating temperature (T-T): 0 - 45 °C

    Storage temperature (T-T): -25 - 70 °C

    Operating relative humidity (H-H): 10 - 85%

    Weight: 4.6 kg

    Expansion slots: 12 (12) x SFP (mini-GBIC)

    Bundled software: Standard Multilayer Software Image (SMI)

    Acoustic pressure emissions: 42 dB

    I/O ports: 12 SFP-based Gigabit Ethernet ports

    Power requirements: 100–240 VAC, 3.0–1.5A, 50–60 Hz

    Networking features: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s

    Connectivity technology: Wired

    Dimensions (WxDxH): 445 x 326 x 44 mm

  • Cisco C3560 "WS-C3560-48PS-S" 48 Ports 10/100 PoE + 4 SFP

    Fabricante: Cisco
    Modelo: WS-C3560-48PS-S

    Performance:

    Stackable: No

    Safety: UL 60950, CAN/CSA C22.2, TUV/GS to EN 60950:2000, CB to IEC 60950, NOM-019-SCFI, CE

    Certification: FCC 15 A, EN 55022: 1998 (CISPR22), EN 55024: 1998 (CISPR24), VCCI A, AS/NZS 3548 A, CE, CNS 13438 A, MIC

    Switch type: Managed

    Switch layer: L2

    Quality of Service (QoS) support: Yes

    Web-based management: Yes

    MIB support: Yes

    Basic switching RJ-45 Ethernet ports quantity: 48

    SFP/SFP+ slots quantity: 4

    SFP module slots quantity: 4

    Networking standards: IEEE 802.1D,IEEE 802.1p,IEEE 802.1s,IEEE 802.1w,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ad,IEEE 802.3af,IEEE 802.3u,IEEE 802.3x,IEEE 802.3z

    10G support: No

    Copper ethernet cabling technology: 100Base-TX,10Base-T

    Full duplex: Yes

    IP routing: Yes

    Spanning tree protocol: Yes

    Broadcast storm control:Yes

    Link aggregation: Yes

    Flow control support: Yes

    Rate limiting: Yes

    MAC address table: 12000 entries

    Supported data transfer rates: 10/100 Mbps

    Switching capacity: 32 Gbit/s

    Store-and-forward: Yes

    Maximum data transfer rate: 0.1 Gbit/s

    Jumbo frames support: Yes

    DHCP features: DHCP server

    Access Control List (ACL): Yes

    IGMP snooping: Yes

    Multicast support: Yes

    Management protocols: IGMP, RMON, SNMP, Telnet

    Internal memory: 128 MB

    Flash memory: 32 MB

    Mean time between failures (MTBF): 173400 h

    Power consumption (typical): 65 W

    Power over Ethernet (PoE): Yes

    Operating temperature (T-T): 0 - 45 °C

    Storage temperature (T-T): -25 - 70 °C

    Operating relative humidity (H-H): 10 - 85%

    Operating altitude: 0 - 3049 m

    Weight: 6.1 kg

    Connectivity LEDs: Yes

    Acoustic pressure emissions: 48 dB

    Management platform: Cisco IOS CLI, Cisco Network Assistant, SAA

    Power requirements: 100-240 VAC, 3.0-1.5A, 50-60Hz

    Connectivity technology: Wired

    Dimensions (WxDxH): 445 x 378 x 44 mm

    Packet transfer speed: 13.1 mpps

  • 1 x Force10 S50 48 Port Gigabit Ethernet Switch S50-01-GE-48T-AC 759-00056-03 AC/DC

    1 x Power Cable

    Description

    Enclosure Type: Desktop - 1U

    Width: 17.3 in

    Subtype: Gigabit Ethernet

    Depth: 16.7 in

    Height: 1.7 in

    Ports: 48 x 10/100/1000 + 4 x shared SFP

    Weight: 14.33 lbs

    Height (Rack Units): 1 m

    Authentication Method: RADIUS, Secure Shell v.2 (SSH2), TACACS

    MAC Address Table Size: 16K entries

    Status Indicators: Port status, link activity, port transmission speed, power, status

    Encryption Algorithm: MD5, SSL

    Routing Protocol: OSPF, RIP, RIP-1, RIP-2, IGMPv2, IGMP, DVMRP, VRRP, OSPFv2, PIM-SM, IGMPv3

    EXPANSION / CONNECTIVITY

    Installed Modules Qty: (Max) 0 (installed) / 1 (max)

    NETWORKING

    Ports Qty: 48

    Connectivity Technology: wired

    Cabling Type: Ethernet 1000Base-T, Ethernet 100Base-TX, Ethernet 10Base-T

    MAC Address Table Size: 16K entries

    Remote Management Protocol: HTTP, Telnet, HTTPS, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 1, SNMP 2, SNMP 3

    Features: ARP support, layer 2 switching, layer 3 switching, manageable, routing, BOOTP support, DHCP support, DiffServ support, IGMP snooping, SNTP support, VLAN support, auto-uplink (auto MDI/MDI-X), flow control

    Compliant Standards IEEE 802.1D, IEEE 802.3ak, IEEE 802.3x, IEEE 802.3z, IEEE 802.1Q, IEEE 802.1ab (LLDP), IEEE 802.1ad, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ab, IEEE 802.3ae

    Switching Protocol: Ethernet

    Routing Protocol: DVMRP, RIP-2, VRRP, IGMP, IGMPv2, IGMPv3, OSPF, OSPFv2, PIM-SM, RIP, RIP-1

    Status Indicators: link activity, port status, port transmission speed, power, status

    CHASSIS

    Installed Devices / Modules Qty: 0

    Supported Devices / Modules Qty: 1

    MISCELLANEOUS

    Encryption Algorithm: MD5, SSL

    POWER

    Features: Redundant Power System (RPS) connector

    Frequency Required: 50/60 Hz

    Power Consumption Operational: 150 Watt

    ENVIRONMENTAL PARAMETERS

    Min Operating Temperature: 32 °F

    Max Operating Temperature: 104 °F

    Humidity Range Operating: 10 - 95%

  • REF: DELLSOHO

    Description: This listing is for a used  SonicWall Dell VPN Firewall Network Security Appliance APL31-0B9

    Condition: ​This firewall was pulled from a working office environment. We have power tested it since. Buyer is responsible for reset, configuration, and licensing if/when applicable. Comes with power supply. Please review photos.

    Whats Included: 

    1x SonicWall Dell VPN Firewall 

    1x Power Suplly 

    Consumo: 60W

    Condición: el equipo se entrega en funcionamiento y presenta el desgaste habitual de un producto que ha sido usado con anterioridad.

    Garantía: 24 meses