Routers y Switches

Filtrar por

Disponibilidad

Disponibilidad

Estado

Estado

Marca

Marca

Peso

Peso

  • 2kg - 100kg

Precio

Precio

  • 4,00 € - 2.000,00 €

Routers

Routers

Filtros activos

  • REF: SERVERIRON450

    Fabricante: Foundry
    Modelo: ServerIron 450 (8450)
    Tarjetas:
    WSM7 - Mgnt VII ( 1 Unidad )
    J-B16Gx - MGBIC Jetcore ( 1 Unidad ) - 2 Unidades FTLF8519P2BCA

    J-B16Gc - GC - Jetcore ( 1 Unidades )
    Power Supply ( 2 Unidades )
    Features:
    The Foundry ServerIron 450 Web Switch is a high performance layer 4-7 switch, combining a rich set of application intelligence to deliver high availability, security, and scalability for mission critical applications and server farms.
    The ServerIron 450 uses innovative security features and high performance architecture to protect critical applications and servers from multi-gigabit wire-speed Denial of Service (Dos) attacks, while supporting a comprehensive set of load balancing and layer 7 switching features to build scalable and highly available applications.

    Consumo energético: 550W

    Condición:el Switch se entrega en funcionamiento y presenta el desgaste habitual de un producto usado.

    Garantía: 24 meses

  • REF: J9019A

    Fabricante: HP
    Modelo: J9019A - HP Procurve Switch 2510-24
    Puertos disponibles: 24 RJ-45 10/100
    Puertos Gigabit: 2 Unidades 10/100/1000-T or mini-GBIC connectivity
    Routing/switching capacity: 8.8Gbps
    Throughput: up to 6.5 million pps (64-byte packets)
    Dimensiones de rack: 19 in. Rack. (Se incluyen las abrazaderas)
    Comunicaciones: General Protocols: IEEE 802.1p Priority

    Consumo energético: 515W

    Garantía: 24 meses

  • REF: CK721

    Fabricante: Johnson Controls
    Modelo: CK721

    Specifications

    The CK721 is an advanced, intelligent network access controller capable of handling high volume, hig

    The CK721 is an advanced, intelligent network access controller capable of handling high volume, high-speed traffic with host security management systems. Easily integrated with any reader via Fiber Optic or UTP Cat-5E tranmission and its P2000 software retains many of the same capabilities as others and can be programmed remotely or through its own interface. It allows you to intergrate with any other sub system with high-level interfacing.

    Made from Johnson Controls U.S.A.

    1. Up to 16 readers per panel.
    2. Embedded 32 bit processor.
    3. 32MB flash memory.
    4. 10/100Base-T network or Fiber Optic connection.
    5. DB9 port for configuration, commissioning and service maintenance.
    6. 32MB memory for 100,000 cardholders.
    7. Accepts up to 20-digit badge numbers.
    8. 12 facility codes per reader (192 per panel).
    9. 40 Holidays.
    10. 64 Time zones.
    11. 8 Access group/time zone pairs per badge.
    12. Modem connection allows for additional redundancy features (CK721M only).
    13. Wiegand, proximity, magnetic stripe, barium ferrite, smart card, most biometric readers and bar code card technologies are supported (custom engineered formats can also be accepted).
    14. Time and attendance.
    15. Alarm notification

    Consumo energético: 330W

    Condición: El artículo se entrega en funcionamiento y presenta el desgaste habitual de un producto usado.

    Garantía: 24 meses

  • REF: RDR2S

    Fabricante: Johnson Controls
    Modelo: S300-DIN-RDR2S

    Description
    The S300-DIN-RDR2S module supports one or two doors per
    module. It uses standard RS-485 communications and can interface
    with the following controllers:
    CK722
    CK721-A
    CK721
    CK720/CK705
    The S300-DIN-RDR2S, also referred to as the RDR2S, provides the
    ability to configure supervised 4-state inputs and unsupervised
    2-state inputs. A total of 10 inputs can be configured as supervised 4-
    state inputs (normally open or normally closed), or 2-state inputs.
    When interfacing to a single door, the unused points can be
    configured as general purpose input/output (I/O) points, possibly
    eliminating the need to purchase additional I/O modules for certain
    installations.
    The RDR2S provides power for card readers and door locking
    hardware

    Features
    2-state (unsupervised) or 4-state (supervised) inputs –
    Unsupervised inputs report either open or closed. Supervised
    inputs provide two additional states that indicate tampering to an
    external device.
    Support of RS-485 bus communications at 9600 or 19200
    baud – Improved performance with improved RS-458 bus polling
    algorithm.
    Easy installation – Modules be mounted on a flat surface, DIN
    rail, or in available UL Listed enclosures.
    Expandable modular design – RDR2S modules can be
    connected together via RS-485.
    Agency listing – The RDR2S is UL294 listed.

    Operation
    The RDR2S provides the following connections when configured to
    control one or two doors:
    Inputs – Request to exit devices, door position contacts, and
    readers (PIN, card or biometric)
    Outputs – Electric locking mechanisms, such as a strike, and
    shunt alarm
    Note: The RDR2S does not support 1-wire Wiegand signal or matrix
    (row/column) keypads. Readers requiring these connection types are
    still supported by the RDR2.
    Power Requirements
    The RDR2S requires 24 VDC input power and can draw as much as
    1.5 amps (depending on the power requirements of the connected
    devices). The RDR2S also requires a 2-wire RS-485 connection back
    to the controller.
    The RDR2S can provide 5, 12, or 24 VDC to the reader

    Consumo energético: 24VDC

    Garantía: 24 meses

  • REF: IBM2498B80B

    Fabricante: IBM
    Modelo: 2498-B80 ( SAN80B-4 )

    Puertos activos: 80 Puertos
    Fuentes de alimentación: 2 Unidades instaladas.
    SW SFPS: Incluye 80 unidades de 8Gb SW Brocade 57-1000117-01

    El equipo a sido de rack´s en funcionamiento y esta en perfecto estado. El Switch requiere de licencia a gestionar con el fabricante (cualquier duda consultar con el vendedor)

    Condición: el Switch se entrega en funcionamiento.

    Consumo energético: 91W 

    Garantía: 24 meses

    Especificaciones:

    * 8 Gbps FC interfaces 1, 2, 4, and 8 Gbps auto-sensing FC ports
    * Universal ports self-configure as E, F, M, or FL ports, and EX Ports. EX ports are activated on a per-port basis with the optional Integrated Routing license
    * Unicast, multicast (255 groups), and broadcast data traffic types are supported
    * ISL Trunking allows up to eight ports (at 1, 2, 4, or 8 Gbps speeds) between a pair of switches to be combined to form a single, logical ISL with a speed of up to 64 Gbps (128 Gbps full duplex) for optimal bandwidth utilization and load balancing
    * Dynamic Path Selection optimizes fabric-wide performance and load balancing by automatically routing data to the most efficient available path in the fabric
    * Extended distance support enables full performance for native FC extension with support of up to 3000 km for native FC
    * Small Form-Factor Pluggable (SFP) optical transceivers support any combination of Shortwave (SW), Longwave (LW), and Extended Longwave (ELW) optical media on a single switch
    * Fabric OS delivers distributed intelligence throughout the network and enables a wide range of value-added applications
    * Optional value-added software offerings
    * Utilization of the EZSwitchSetup wizard, which makes SAN configuration a three-step point-and-click task
    * Extensive diagnostics and system-monitoring capabilities enhance RAS

  • REF: CISCONEXUSC9500

    Cisco Nexus 9500 Series - N9K-C9504 + Modules: "N9K-X97160YC-EX" + N9K-X9788TC-FX

    Brand: Cisco

    Model: Nexus 9500 Series - Chasis: N9K-C9504

    Modules: 

    Cisco "N9K-X97160YC-EX": N9K-X97160YC-EX: 1, 10 and 25 Gigabit Ethernet Access-Layer and 10, 40 and 100 Gigabit Ethernet Aggregation-Layer Line Card

    • 48-port 1, 10 and 25 Gigabit Ethernet SFP+ with 4-port 100 Gigabit Ethernet QSFP+ line card
    • Nonblocking, 40-MB buffer
    • Greater distance options for 25G deployments with FC and RS FEC
    • Supports VXLAN routing and bridging
    • NX-OS mode only
    • Supported in 4-, 8-, and 16-slot chassis
    • Requires 4 fabric modules for maximum bandwidth
    • Compatible with N9K-C9504-FM-E, N9K-C9508-FM-E, and N9KC9516-FM-E

    Cisco "N9K-X9788TC-FX": 

    • Gigabit Ethernet / 10Gb Ethernet x 48 + 100 Gigabit QSFP28 x 4
    • FX

    Two Units: Cisco SUP1 and SUP2 "N9K-SUP-A+" 

    Three Units: Cisco Power Supply 

    Cisco: Official Cisco Web

    MAX Power consumption: 6000W 

    Warranty: 1 Year.