List of products by brand Juniper

  • Juniper EX2200-48P-4G POE 48 Gigabit Ethernet Switch + 4 SFP

    Fabricante: Juniper
    Modelo: EX2200-48P-4G POE

    Características:

    Hardware Specifications
    Switching Engine Model Store and forward
    DRAM 512 MB
    Flash 1 GB
    CPU 800 MHz ARM CPU
    GbE port density per system 52 (48 host ports+ four-port GbE uplinks)
    Packet Switching Capacities 104 Gbps
    Layer 2 Throughput (Mpps) 77.4 Mpps (wire speed)
    Environment
    Operating Temperature 32° to 113° F (0º to 45º C)
    Storage Temperature -40º to 158º F (-40º to 70º C)
    Relative Humidity (Operating) 10% to 85% (noncondensing)
    Relative Humidity (Non-Operating) 0% to 95% (noncondensing)
    Altitude (Operating) Up to 10,000 ft (3,048 m)
    Altitude (Non-Operating) Up to 16,000 ft (4,877 m)
    Cooling Airflow: 16.4 cfm
    Power Options
    Power Supplies 91 W AC Maximum System Power Consumption (Input Power without PoE)
    405 W Total PoE Power Budget
    Physical Specifications
    Dimensions (W x H x D) Width: 17.4 in (44.1 cm) for desktop installations
    17.5 in (44.6 cm) with rack-mount brackets
    Height: 1.75 in (4.45 cm) for 1U installations
    Depth: 10 in (25.43 cm)
    Weight 10 lb (4.5 kg)
    Rack mountable 1 Rack Unit
    Safety and Compliance
    Safety Certifications UL-UL60950-1 (First Edition)
    C-UL to CAN/CSA 22.2 No.60950-1 (First Edition)
    TUV/GS to EN 60950-1, Amendment A1-A4, A11
    CB-IEC60950-1, all country deviations
    Electromagnetic Compatibility Certifications FCC 47CFR Part 15 Class A
    EN 55022 Class A
    ICES-003 Class A
    VCCI Class A
    AS/NZS CISPR 22 Class A
    CISPR 22 Class A
    EN 55024
    EN 300386
    CE
    NEBS GR-63-Core: NEBS, Physical Protection
    GR-1089-Core: EMC and Electrical Safety for Network Telecommunications Equipment
    All models except EX2200-24P-4G and EX2200-48P-4G
    Telecom Quality Management TL9000
    Environmental Reduction of Hazardous Substances (ROHS) 6
    Telco CLEI code

    Consumo: 130W

    Garantía: 24 Meses

  • REF: EX430024T

    Juniper Networks EX4300-24T 24-Ports 10/100/1000 - Layer 3 Switch

    Fabricante: Juniper
    Modelo: EX430024T 

    Description: 

    Juniper EX4300-24T. Switch type: Managed. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 24, Installed SFP+ modules quantity: 4. MAC address table: 64000 entries, Switching capacity: 448 Gbit/s. Networking standards: IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE.... Rack mounting, Form factor: 1U

    EX4300 Ethernet switches are compact, fixed-configuration platforms that satisfy a variety of high-performance branch, campus and data center access deployments. Juniper Virtual Chassis technology enables up to 10 EX4300 switches to be interconnected over a 320 Gbps backplane using four back-panel 40GbE ports, creating a single, logical device that delivers a highly scalable, cost-effective solution for growing campus environments. Five-member full-mesh Virtual Chassis configurations spanning up to 150 meters are also supported, delivering a low-latency solution that ensures switch members are just one hop away from every other switch. The EX4300 switches support 10/100/1000BASE-T with both 24- and 48-port models. Power over Ethernet (PoE)-enabled EX4300 models offer standards-based 802.3at PoE+, delivering up to 30 watts on all ports for supporting high-density IP telephony and 802.11n wireless access point deployments. A dual-purpose four-port GbE/10GbE fiber uplink module is also available.

    Specifications: 

    Condition: Used, Pull from a working condition.

    Warranty: 24 Months