Cisco Catalyst 9300 "C9300-48T-E V05" 48-ports + C9300-NM-8X "10G" - 1U -

Cisco Catalyst C9300-48T-E Specifications

Form Factor and Series:

• 1RU fixed switch

• Catalyst 9300 Series

• Network Essentials license tier

Performance and Capacity:

• Switching capacity: 256 Gbps (full duplex)

• Forwarding rate: approximately 190.48 Mpps

Ports and Interfaces:

• 48 × 10/100/1000 Mbps copper (RJ-45) ports

• Modular uplink slots for optional uplink modules (10G / 40G)

Power and PoE:

• Default AC power supply: 350W AC

• PoE: Not supported (no PoE budget)

Stacking and High Availability:

• Supports StackWise-480 (480 Gbps stacking bandwidth)

• Supports StackPower for power sharing and redundancy

Memory and Storage:

• System memory (DRAM): 8 GB

• Flash memory: 16 GB

Physical and Mechanical:

• Dimensions (H × W × D): 1.73 × 17.5 × 17.5 in (4.4 × 44.5 × 44.5 cm)

• Weight: approximately 16.33 lb (7.4 kg)

Software and Features:

• Runs Cisco IOS XE software

• Layer 2 and Layer 3 switching features (depending on license)

• QoS, ACLs, advanced security and automation capabilities

• Designed for enterprise access and campus networks

Cisco C9300-NM-8X Specifications

Type:

• Network / uplink module (plug-in)

• Designed for Cisco Catalyst 9300 Series switches

Ports and Interfaces:

• 8 × 10 Gigabit Ethernet (SFP+) ports

• Ports operate by default in 10G mode (even when using 1G SFPs)

Performance and Power:

• Data rate per port: 10 Gbps

• Typical power consumption: approximately 20 W

Compatibility and Features:

• Fully compatible with all Cisco Catalyst 9300 Series switches

• Hot-swappable (can be inserted or removed without powering down the switch)

• Supports LACP (Link Aggregation Control Protocol) and standard Cisco uplink features

Installation and Port Naming:

• Ports are identified as TenGigabitEthernet1/1/1 through TenGigabitEthernet1/1/8

Physical and Environmental:

• Dimensions (H × W × D): approximately 1.16 × 7.34 × 8.42 inches

• Operating temperature range: 0°C to 40°C

Description:

• The C9300-NM-8X is an optional uplink module for Catalyst 9300 switches, providing eight high-speed 10G SFP+ ports for flexible network expansion and stacking interconnects.