Switches

Cisco Catalyst "WS-C2960X-48FPS-L" 48 Gigabit Poe Interruptor + Rack Base

Brand: Cisco
Model: WS-C2960X-48FPS-L

Warranty of "24" Months inside Spain
Warranty of "12" Months for countries outside Spain

If you want to check the console click the following link "CONSOLE"

Características:

Cisco Catalyst WS-C2960G-48TC-L Managed Ethernet Switch

Fabricante: Cisco
Modelo: WS-C2960G-48TC-L

Garantía de 24 Meses.

Características:

Power Rating: 0.075 kVA

Dimensions (H x W x D): 1.73 x 17.5 x 9.3 in. (4.4 x 44.5 x 23.6 cm.)

Max. Watt Power Consumption: 45

DC input voltages (RPS input): 12 V at 5 A

Operating Relative Humidity: 10% to 95% noncondensing

Unicast MAC Addresses: 8000

Operating Temperature up to 5000 ft (1500 m): 23 to 113 F (-5 to 45 C)

Short-term Exception up to 10,000 feet (3000 m): 23 to 113 F (-5 to 45 C)

MTBF: 336,409 hours

Max. Watt Power: 45

IPv4 IGMP Groups: 255

Operating Temperature up to 10,000 ft (3000 m): 23 to 104 F (-5 to 40 C)

Maximum Transmission Unit (MTU): Up to 9000 bytes

Short-term Exception up to 5000 feet (1500 m): 23 to 122 F (-5 to 50 C)

Voltage: 100 to 240 VAC (Autoranging); 50 to 60 Hz

Short-term Exception at Sea Level: 23 to 131 F (-5 to 55 C)

Operating Altitude: Up to 10,000 feet (3000 m)

Packets per second (Mpps): 10.1

Max VLANs: 255

Rack Height: 1 RU

AC/DC Support: AC only

Ports: 48 Ethernet 10/100 ports

Switching Bandwidth: 32 Gbps

Uplinks: 2 dual-purpose ports (10/100/1000 or SFP) - each dual-purpose uplink port has 1 10/100/1000 Ethernet port and 1 SFP-based Gigabit Ethernet port, 1 port active

Weight: 8 lbs (3.6 kg)

Short-term Exception up to 13,000 feet (4000 m): 23 to 104 F (-5 to 40 C)

Storage Altitude: Up to 13,000 feet (4000 m)

Memory DRAM: 64 MB

Storage Relative Humidity :10% to 95% noncondensing

Model: LAN Base Layer 2

Forwarding Bandwidth: 16 Gbps

Flash Memory: 32 MB

Storage Temperature up to 15,000 feet (4573 m): -13 to 158 F (-25 to 70 C)

Power Consumption: Measured 100% Throughput (with Max. PoE loads) of 162

VLAN IDs: 4000

Jumbo Frames: 9018 bytes

REF: 73541907A0

Marca: Cisco
Modelo: 73-5419-07
Tipo de dispositivo: Fast Ethernet Port Adapter Module

Estado del artículo: el artículo es usado y en buen estado de funcionamiento.

Garantía: 24 meses

REF: SAVAM2

Marca: Cisco
Modelo: SA-VAM2+ / 73-9571-06 A0
Tipo de dispositivo: VPN Acceleration Module
S/N: JAB110801BB

The Service Adapter VPN Acceleration Module 2 (SA-VAM2) is a single-width port adapter supported on the Cisco 7301 router and the Cisco 7200 series routers with the network processing engine 225 (NPE-225), 400 (NPE-400), G1 (NPE-G1), and the Network Services Engine (NSE-1) services accelerator. An SA-VAM2 provides hardware-assisted tunneling and encryption/compression services for Virtual Private Network (VPN) remote access, site-to-site intranets, and extranet applications, including security, quality of service (QoS), firewall and intrusion detection, and service-level validation and management. The SA-VAM2 offloads IPSec processing from the main processor to permit resources on the processor engines for other task

Estado del artículo: el artículo es usado y en buen estado de funcionamiento.

Garantía: 24 meses

REF: 3C16980A

Fabricante: 3COM
Modelo: 3C16980A - SuperStack 3 Switch 3300

The 3C16980A SuperStack 3 Switch 3300 provides the smoothest migration to Fast Ethernet with 10/100 autosensing on all ports to adjust automatically to the speed of the attached devices. The SuperStack 3 Switch 3300 is available in 12- or 24-port versions and features an optional expansion modules slot.

Condición: el Switch se entrega en funcionamiento y presenta el desgaste habitual de un producto usado.

Consumo energético: 45W

Garantía: 24 meses

REF: 3C17300A

Fabricante: 3COM
Modelo: 3C17300 - SuperStack 3 Switch 4226T

Brand: 3Com
Model: SuperStack3 4226T
Product Line: 3Com SuperStack 3

Type: Ethernet Switch
Manageable Device: Fully Managed
Layer: 2
Stackable Swicth: Stackable

Console Port Type: Serial (9-pin)
Ports: 24 x 10Base-T/100Base-TX (RJ-45)
Uplink/Additional Port(s): 2 x 1000Base-T (RJ-45)

MAC Address Entries: 8000
Layer 2 Forwarding Rate: 6.6 Mpps
Switch Fabric Capacity: 8.8 Gbps

Remote Management Protocol: RMON, SNMP
Protocols: DiffServ
LAN Standards: IEEE 802.1Q Virtual LANs (VLAN), IEEE 802.1d Spanning Tree Bridge, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP), IEEE 802.3 CSMA/CD or Ethernet, IEEE 802.3ab 1000 Mbps (Gigabit Ethernet), IEEE 802.3ad Link aggregation, IEEE 802.3i, IEEE 802.3u 100 Mbps (Fast Ethernet), IEEE 802.3x Flow Control, IEEE 802.3z Gigabit Ethernet over fiber standard (1000BaseX)

Led Indicators: Link / Status, Power

Consumo energético: 40W

Condición: el Switch se entrega en funcionamiento y presenta el desgaste habitual de un producto usado.

Garantía: 24 meses

REF: IBM2498B80A

Fabricante: IBM
Modelo: 2498-B80 ( SAN80B-4 )

Puertos activos: 80 Puertos
Fuentes de alimentación: 2 Unidades instaladas.
SW SFPS: Incluye 80 unidades de 4Gb SW Brocade 57-1000013-01

El equipo a sido de rack´s en funcionamiento y esta en perfecto estado. El Switch requiere de licencia a gestionar con el fabricante (cualquier duda consultar con el vendedor)

Condición: el Switch se entrega en funcionamiento.

Garantía: 24 meses

Especificaciones:

* 8 Gbps FC interfaces 1, 2, 4, and 8 Gbps auto-sensing FC ports
* Universal ports self-configure as E, F, M, or FL ports, and EX Ports. EX ports are activated on a per-port basis with the optional Integrated Routing license
* Unicast, multicast (255 groups), and broadcast data traffic types are supported
* ISL Trunking allows up to eight ports (at 1, 2, 4, or 8 Gbps speeds) between a pair of switches to be combined to form a single, logical ISL with a speed of up to 64 Gbps (128 Gbps full duplex) for optimal bandwidth utilization and load balancing
* Dynamic Path Selection optimizes fabric-wide performance and load balancing by automatically routing data to the most efficient available path in the fabric
* Extended distance support enables full performance for native FC extension with support of up to 3000 km for native FC
* Small Form-Factor Pluggable (SFP) optical transceivers support any combination of Shortwave (SW), Longwave (LW), and Extended Longwave (ELW) optical media on a single switch
* Fabric OS delivers distributed intelligence throughout the network and enables a wide range of value-added applications
* Optional value-added software offerings
* Utilization of the EZSwitchSetup wizard, which makes SAN configuration a three-step point-and-click task
* Extensive diagnostics and system-monitoring capabilities enhance RAS

Consumo energético: 84W típico, 91W máximo.

REF: J4900B

Fabricante: HP
Modelo: J4900B
Forma: 1U
Cantidad de puertos: 24 Unidades.
Protocolo: Ethernet.
Compatibilidad: PC.

Overview The J4900B HP ProCurve 2626 switch has 24 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX); 1 RS-232C DB-9 console port; 2 dual-personality ports - each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base- TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or an open mini-GBIC slot (for use with mini-GBIC transceivers)

Benefits

• Dual-personality functionality: two 10/100/1000 ports or mini-GBIC slots for optional fiber connectivity such as Gigabit-SX, -LX, or -LH 13.6 Gbps (ProCurve 2650 and 2650-PWR)/9.6 Gbps (ProCurve 2626, 2626-PWR, 2600-8-PWR) backplane: wire-speed non-blocking architecture for low-latency throughput
• Basic IP routing: enables automatic routing to the connected VLANs and up to 16 static routes--including one default route--in IP networks
• Traffic prioritization (IEEE 802.1p): allows real-time ProCurve Switch 2600 series traffic classification into 8 priority levels mapped to 4 queues

Consumo energético: 15.4W por puerto

Condición: El Switch se entrega en funcionamiento y presenta el desgaste habitual de un producto usado.

Garantía: 24 meses

REF: TLSG1024D

Fabricante: TP-Link
Modelo: TL-SG1024D
Forma: 1U
Cantidad de puertos: 24 Unidades.
Protocolo: Ethernet.
Compatibilidad: PC.

• 24 puertos a 10/100/1000 Mbps
• Innovadora tecnología de eficiencia energética que ahorra en el consumo
• Soporta aprendizaje de direcciones MAC (Auto-Learning) y negociación MDI/MDIX automática
• Diseño Plug & Play

Consumo: 110W

Condición: El Switch se entrega en funcionamiento y presenta el desgaste habitual de un producto usado.

Garantía: 24 meses

Cisco Catalyst 3850 "WS-C3850-12S" 12 Port GE SFP IP Base + Rack Base

Brand: Cisco
Model: WS-C3850-12S

Warranty of "24" Months inside Spain
Warranty of "12" Months for countries outside Spain

If you want to check the console click the following link "CONSOLE"

Características:

REF: BROCADE300

Fabricante: Brocade 300
Modelo: DL-320-0003

16 Bocas: 57-1000117-01

Características:

Brocade 300: switches de Fibre Channel de 24 puertos y 8 Gb/s para SAN empresariales básicas y de rango medio.

Rendimiento de 8 Gb/s rápido y fiable.

• Plataforma sin bloqueos ni suscripciones excesivas con un ancho de banda total de 408 Gb/s en 1U.
• Diseñado para aumentar el rendimiento de la red con enlaces Brocade Inter-Switch Link (ISL) mejorados, que permiten combinar hasta ocho puertos (a velocidades de 2, 4 u 8 Gb/s) entre un par de switches para formar un ISL único y lógico con velocidad hasta 64 Gb/s.
• Utiliza asistencia a distancia extendida para permitir la extensión de Fibre Channel nativa superior a 590 km.

Ampliación asequible

• Permite disponer de hasta 24 puertos de 8 Gb/s con la posibilidad de adaptar la inversión al crecimiento de la empresa en incrementos de 8 puertos (8, 16 o 24 puertos), gracias a la licencia Ports on Demand.
• Contribuye a proteger las inversiones existentes brindando una tecnología de 8 Gb/s con capacidades de detección automática para reconocer también dispositivos de 1, 2 y 4 Gb/s.
• Diseñado para inversiones con garantía de protección en el futuro al permitir a las empresas utilizar SFP de 4 Gb/s en este momento y actualizarse a SFP de 8 Gb/s cuando lo necesiten.

Implementación y administración sencillas

• Utiliza el asistente Brocade EZSwitchSetup, que puede convertir la configuración de SAN en la sencilla tarea de seleccionar y hacer clic en tres pasos.
• Incluye un puerto USB que puede aumentar la capacidad de servicio y el registro de errores al facilitar las actualizaciones de firmware y las descargas de archivos de registro del sistema.
• Incluye una plataforma fácil de utilizar, sin bloqueos ni estructuras excesivas que está diseñada para no perder tiempo en la administración de puertos y cables.

Excelente valor para una variedad de entornos SAN

• Presenta dos modos de funcionamiento: como switch de FC SAN o como Brocade Access Gateway, lo que garantiza una perfecta integración en cualquier entorno SAN.
• Diseñado para ofrecer una mejora de la eficiencia energética superior al 40% (vatios/Gb) respecto a cualquier generación anterior de switches Brocade, reduciendo asimismo el consumo de energía y la carga general de la refrigeración de un centro de datos.

Consola:

The system is coming up, please wait...U-Boot 1.1.3 (Sep 4 2013 - 17:46:27)CPU: AMCC PowerPC 440EPx Rev. A at 660 MHz (PLB=132, OPB=66, EBC=33 MHz) No Security/Kasumi support I2C boot EEPROM enabled Bo otstrap Option G - Boot ROM Location I2C (Addr 0x54) Internal PCI arbiter enabled, PCI async ext clock used 32 kB I-Cache 32 kB D-CacheBoard: TomahawkI2C: readyDRAM: Initializing DDRSDRAM DDR Init: speed = 1320000 02 DQS calibration - Window detected:max_passing_cases = 51wr_dqs_shift = 95dll_dqs_delay_X = 29dll_dqs _delay_X window = 4 - 54DDR0_09=0x00011d5fDDR0_22=0x00267f0bDDR0_17=0x1d006500DDR0_18=0x1d1d1d1dDDR0_19=0x1d1d 1d1dECC Enabling DONE512 MBPOST RAM test disabled.Now running in RAM - U-Boot at: 1fb29000trap_init : 0x0s ystem inventory subsystem initialized FLASH: Tomahawk CFI Flash Driver Initialized 4 MBATA interface setup: io_ba se=0xf8f00000, port=0x3e0, ctl=0x7ecPCI:Skip our host bridge 00 07 1657 0011 0280 18In: serial Out: serialErr: serialNet: Checking system RAM - press any key to stop testChecking memory address: System RAM test using Default POST RAM Test succeeded.set_bootstatus: BS_LOAD_OS, platform_idx = 1 Type run flash_nfs to mount root filesystem over NFSHit ESC to stop autoboot: 0 Map file at LBA sector 0xc7827## Booting image at 00400000 ... Image Name: Linux-2.6.14.2 Image Type: PowerPC Linux Multi- File Image (uncompressed) Data Size: 4290075 Bytes = 4.1 MB Load Address: 00000000 Entry Point: 0000000 0 Contents: Image 0: 3211397 Bytes = 3.1 MB Image 1: 1078663 Bytes = 1 MB## Current stack ends at 0x1F AE7BD8 => set upper limit to 0x00C00000## initrd at 0x007100D4 ... 0x0081765A (len=1078663=0x107587) Loading Ramdi sk to 1f9df000, end 1fae6587 ... OK initrd_start = 1f9df000, initrd_end = 1fae6587 ## Transferring control to Linux (at address 00000000) ...Installing Linux 2.6 KernelAttempting to find a root file system on hda1...INIT: version 2.78 bootingBypassing firmware validation.INIT: Entering runlevel: 3Starting Fabric OS Services...FIPS off, RRD...Found 1(threshold 5) abnormal reboots within 3000 seconds window(threshold)sys_chip_init: class 0 max 24 Don eethsw_ha_enabled = 1uptime: 4293889042; sup_qid: 02021/03/29-15:26:52, [HAM-1004], 225874, CHASSIS, INFO, Brocade 300, Processor rebooted - Reset..Fabric OS (FC_SW2)FC_SW2 console login: SNMP Research EMANATE/Li te Agent Version 16.2.0.9Copyright 1989-2006 SNMP Research, Inc.2021/03/29-15:27:07, [FV-1001], 225875, CHASSIS, INF O, FC_SW2, Flow Vision daemon initialized.ki_state_set: redundant ACTIVATE for instance 12021/03/29-15:27:17, [ZONE- 1022], 225876, FID 128, INFO, FC_SW2, The effective configuration has changed to FABRIC_B2. . 2021/03/29-15:27:17, [FV -1002], 225877, FID 128, INFO, FC_SW2, Flow Vision Config Replay Completed Successfully.Mar 29 15:27:19 All service i nstances on ActivePOST1: Started running Mon Mar 29 15:27:23 CEST 2021POST1: Test #1 - Running turboramtestPOST1: Script PASSED with exit status of 0 Mon Mar 29 15:27:38 CEST 2021 took (0:0:15)POST2: Started running Mon Mar 29 15:27 :40 CEST 2021POST2: Test #1 - Running portloopbacktest (SERDES)POST2: Running diagshowPOST2: Script PASSED with ex it status of 0 Mon Mar 29 15:27:48 CEST 2021 took (0:0:8)2021/03/29-15:27:49, [BL-1000], 225878, CHASSIS, INFO, Brocad e300, Initializing ports...2021/03/29-15:27:49, [BL-1001], 225879, CHASSIS, INFO, Brocade300, Port initialization comp leted.2021/03/29-15:28:26, [TS-1001], 225880, FID 128, WARNING, FC_SW2, NTP Query failed: 256.

Consumo de energía: Consumo nominal del sistema 84 vatios máx. 91 vatios

Garantía: 24 meses

Ref: CARRITORUEDAS

Carrito con 4 ruedas para mover fácilmente el ordenador.

Características:
4 ruedas giratorias, freno de bloqueo en dos de ellas.
Ajustable a la mayoría de CPU del mercado.
Material: Acero
Color: gris marengo.

Garantía: 24 meses