Routers y Switches

REF: CISCONEXUSC9500

Cisco Nexus 9500 Series - N9K-C9504 + Modules: "N9K-X97160YC-EX" + N9K-X9788TC-FX

Brand: Cisco

Model: Nexus 9500 Series - Chasis: N9K-C9504

Modules: 

Cisco "N9K-X97160YC-EX": N9K-X97160YC-EX: 1, 10 and 25 Gigabit Ethernet Access-Layer and 10, 40 and 100 Gigabit Ethernet Aggregation-Layer Line Card

• 48-port 1, 10 and 25 Gigabit Ethernet SFP+ with 4-port 100 Gigabit Ethernet QSFP+ line card
• Nonblocking, 40-MB buffer
• Greater distance options for 25G deployments with FC and RS FEC
• Supports VXLAN routing and bridging
• NX-OS mode only
• Supported in 4-, 8-, and 16-slot chassis
• Requires 4 fabric modules for maximum bandwidth
• Compatible with N9K-C9504-FM-E, N9K-C9508-FM-E, and N9KC9516-FM-E

Cisco "N9K-X9788TC-FX": 

• Gigabit Ethernet / 10Gb Ethernet x 48 + 100 Gigabit QSFP28 x 4
• FX

Two Units: Cisco SUP1 and SUP2 "N9K-SUP-A+" 

Three Units: Cisco Power Supply 

Cisco: Official Cisco Web

MAX Power consumption: 6000W 

Warranty: 1 Year. 

REF: N3048E07W

Fabricante: DELL

Modelo: Dell N3048 E07W

Forma: 1U

Cantidad de puertos: 48 Puertos Gigabit / 2 Puertos Gigabit Combo / 2 Puertos de 10GbeE SFP+ / 2 Puertos dedicados a Stack

Protocolo: Ethernet.

Fuentes de alimentación: 2 Unidades de Fuente de alimentación. (200W MAX)

Incluye: Railes para enracar en rack, 1 Modulo de 10Gb SFP y Un cable para realizar Stack entre Switches. 

Compatibilidad: PC y Servidores. 

Acceso a Consola: Consola Dell N3048 E07W

Consumo energético: 400W MAX

Condición: El Switch se entrega en funcionamiento y presenta el desgaste habitual de un producto usado.

Garantía: 24 meses

REF: CISCO1760A

Fabricante: Cisco
Modelo: Cisco 1700 Series ( Cisco 1760 )

Condición: El Router se entrega en funcionamiento y presenta el desgaste habitual de un producto usado.

Consumo energético: 50W

Garantía: 24 meses

-----------------------------------------------------------------------------------------

Consola:

System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
TAC Support: http://www.cisco.com/tac
Copyright (c) 2003 by cisco Systems, Inc.
C1700 platform with 98304 Kbytes of main memory

program load complete, entry point: 0x80008000, size: 0xe55414
Self decompressing the image : ###################################################### [OK]


Smart Init is enabled
smart init is sizing iomem
ID MEMORY_REQ TYPE
MainBoard 0X00027A80 1760
0X000F3BB0 public buffer pools
0X00211000 public particle pools
0X002E 0X0001B800 Card in slot 0
TOTAL: 0X00347E30

If any of the above Memory Requirements are
"UNKNOWN", you may be using an unsupported
configuration or there is a software problem and
system operation may be compromised.



Allocating additional 7918261 bytes to IO Memory.
PMem allocated: 89304859 bytes

REF: CISCO32MB

Fabricante: Cisco Systems
CompactFlash Card Cisco Original 32MB
Compatible con Routers y Switches Cisco Systems

Garantía: 24 meses

REF: CISCO7604A

Fabricante: Cisco
Modelo: Cisco 7604

Tarjetas incluidas:

Dos unidades de WS-SUP720-3B
Una unidad de FAN-MOD-4HS
Dos unidades de PWR-2700-AC/4

Caracteristicas:

Physical specifications: 5RU (8.75-in.) chassis, 4-slot chassis, Dimensions (H x W x D): 8.75 x 17.5 x 21.75 in. (22.225 x 44.45 x 55.245 cm), Weight: 40 lb
Power requirements: 110 to 240 VAC, –48 to –60 VDC, Mean time between failure (MTBF): 7 years for system configuration.

Environmental conditions: Operating temperature: 32 to 104°F (0 to 40°C), Storage temperature: –4 to 149°F (–20 to 65°C), Relative humidity, operating: 10 to 85% noncondensing, Relative humidity, storage: 5 to 95% noncondensing, Operating altitude: –500 to 6500 ft

Regulatory compliance:

EMC: FCC Part 15 (CFR 47) Class A, ICES-003 Class A, EN55022 Class A, CISPR22 Class A, AS/NZS 3548 Class A, VCCI Class A, EN55024, ETS300 386, EN50082-1, EN61000-3-2, EN61000-3-3,

Regulatory Compliance: UL 60950, IEC 60825-1, -2, IEC 60950, EN 60950, EN 60825-1, -2, CAN/CSA-C22.2 No. 60950-00, AS/NZS 3260-1993, 21CFR1040.

Safety and environmental standards compliance: GR-63-Core NEBS Level 3 (post-FCS), GR-1089-Core NEBS Level 3 (post-FCS), ETSI 300 019 Storage Class 1.1, ETSI 300 019 Transportation Class 2.3, ETSI 300 019 Stationary Use Class 3.1

Minimum software release: Cisco IOS® Software Release 12.2.18SXE

Consumo energético: 2700W

Condición: el Switch se entrega en funcionamiento y presenta el desgaste habitual de un producto usado.

Garantía: 24 meses

REF: Cisco4506

Fabricante: Cisco
Modelo: Cisco 4506

Tarjetas incluidas:

Dos unidades de Power Supply
Una unidad de WS-X4515 Supervisor Engine IV
Cuatro unidades de WS-X4306-GB

Consola:


**********************************************************
* *
* Welcome to Rom Monitor for WS-X4515 System. *
* Copyright (c) 1999-2004 by Cisco Systems, Inc. *
* All rights reserved. *
* *
**********************************************************

Rom Monitor Program Version 12.2(20r)EW1
Supervisor: WS-X4515 Chassis: WS-C4506
Hardware Revisions - Board: 2.7 CPLD: 29 Dagobah: 95


MAC Address : 00-11-21-71-c9-d2
Ip Address : Not set.
Netmask : Not set.
Gateway : Not set.
TftpServer : Not set.
Main Memory : 512 MBytes



***** The system will autoboot in 5 seconds *****


Type control-C to prevent autobooting.
. . . . .

******** The system will autoboot now ********


config-register = 0x2102
Autobooting using BOOT variable specified file.....

Current BOOT file is --- bootflash:cat4500-entservicesk9-mz.122-40.SG.bin

Rommon reg: 0x5F004380
###########
k2diags version 5.2_b

prod: WS-X4515 part: 73-9254-02 serial: JAE090867FP


Power-on-self-test for Module 1: WS-X4515
Port/Test Status: (. = Pass, F = Fail, U = Untested)
Reset Reason: PowerUp



Cpu Subsystem Tests ...
seeprom: . temperature_sensor: . eobc: .

Port Traffic: L2 Serdes Loopback ...
0: . 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: .
12: . 13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: .
24: . 25: . 26: . 27: . 28: . 29: . 30: . 31: .


Port Traffic: L2 Asic Loopback ...
0: . 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: .
12: . 13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: .
24: . 25: . 26: . 27: . 28: . 29: . 30: . 31: .


Port Traffic: L3 Asic Loopback ...
0: . 1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: .
12: . 13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: .
24: . 25: . 26: . 27: . 28: . 29: . 30: . 31: .


Switch Subsystem Memory ...
1: . 2: . 3: . 4: . 5: . 6: . 7: . 8: . 9: . 10: . 11: . 12: .
13: . 14: . 15: . 16: . 17: . 18: . 19: . 20: . 21: . 22: . 23: . 24: .
25: . 26: . 27: . 28: . 29: . 30: . 31: . 32: . 33: . 34: . 35: . 36: .
37: . 38: . 39: . 40: . 41: . 42: . 43: . 44: . 45: . 46: . 47: . 48: .
49: . 50: . 51: . 52: . 53: . 54: . 55: .


Module 1 Passed


Exiting to ios...

Rommon reg: 0x5F000380
############################################
Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706



Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-ENTSERVICESK9-M), Version 12.2(40)SG, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 07-Nov-07 18:00 by prod_rel_team
Image text-base: 0x10000000, data-base: 0x11ADF0B8

Testing packet buffer memory: 00000000000000512001024001536002048002560003072003584004096004608005120005632006144006656007168007680008192008704009216009728010240010752011264011776012288012800013312013824014336014848015360015872016384016896017408017920018432018944019456019968020480020992021504022016022528023040023552024064024576025088025600026112026624027136027648028160028672029184029696030208030720031232031744032256032768033280033792034304034816035328035840036352036864037376037888038400038912039424039936040448040960041472041984042496043008043520044032044544045056045568046080046592047104047616048128048640049152049664050176050688051200051712052224052736053248053760054272054784055296055808056320056832057344057856058368058880059392059904060416060928061440061952062464062976063488064000064512065024065536..done
All packet buffers passed.

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C4506 (MPC8245) processor (revision 7) with 524288K bytes of memory.
Processor board ID FOX0909017D
MPC8245 CPU at 333Mhz, Supervisor IV
Last reset from PowerUp
1 Virtual Ethernet interface
26 Gigabit Ethernet interfaces
403K bytes of non-volatile configuration memory


Press RETURN to get started!

Consumo energético máximo por ranura: 1500W

Condición: el Switch se entrega en funcionamiento y presenta el desgaste habitual de un producto usado.

Garantía: 24 meses

REF: WIC1ADSL

Fabricante: Cisco
Modelo: WIC-1ADSL
Forma: Tarjeta para WIC Cisco
Cantidad de puertos: 1 Unidad ADSL
Protocolo: Ethernet.
Compatibilidad: Cisco

Condición: El Switch se entrega en funcionamiento y presenta el desgaste habitual de un producto usado.

Garantía: 24 meses

Ref: NOKIA380

Marca: Nokia

Modelo: IP380

Tipo de Dispositivo: Firewall

Tamaño: 1RU - 19inch
Interfaces:

6 - LAN Interfaces 10/100 Ethernet ports

1 - PMC hot-swappable NIC slot

2 - PCMCIA Interfaces

1 - PMCslot for a VPN accelerator

Memoria: 1GB

Consumo energético: 230W/A

Estado del artículo: Usado

Garantía: 24 meses

REF: FOUNDRY

Fabricante: Foundry
Modelo: FCSLB16
Información adicional:
Ports: 16-port 10/100Base-TX (RJ45) with one expansion slot.
Switching capacity: 3.6 Gbps

Consumo energético (máximo): 220W/A

Garantía: 24 meses

REF: SERVERIRON450

Fabricante: Foundry
Modelo: ServerIron 450 (8450)
Tarjetas:
WSM7 - Mgnt VII ( 1 Unidad )
J-B16Gx - MGBIC Jetcore ( 1 Unidad ) - 2 Unidades FTLF8519P2BCA

J-B16Gc - GC - Jetcore ( 1 Unidades )
Power Supply ( 2 Unidades )
Features:
The Foundry ServerIron 450 Web Switch is a high performance layer 4-7 switch, combining a rich set of application intelligence to deliver high availability, security, and scalability for mission critical applications and server farms.
The ServerIron 450 uses innovative security features and high performance architecture to protect critical applications and servers from multi-gigabit wire-speed Denial of Service (Dos) attacks, while supporting a comprehensive set of load balancing and layer 7 switching features to build scalable and highly available applications.

Consumo energético: 550W

Condición:el Switch se entrega en funcionamiento y presenta el desgaste habitual de un producto usado.

Garantía: 24 meses

REF: J9019A

Fabricante: HP
Modelo: J9019A - HP Procurve Switch 2510-24
Puertos disponibles: 24 RJ-45 10/100
Puertos Gigabit: 2 Unidades 10/100/1000-T or mini-GBIC connectivity
Routing/switching capacity: 8.8Gbps
Throughput: up to 6.5 million pps (64-byte packets)
Dimensiones de rack: 19 in. Rack. (Se incluyen las abrazaderas)
Comunicaciones: General Protocols: IEEE 802.1p Priority

Consumo energético: 515W

Garantía: 24 meses

REF: CK721

Fabricante: Johnson Controls
Modelo: CK721

Specifications

The CK721 is an advanced, intelligent network access controller capable of handling high volume, hig

The CK721 is an advanced, intelligent network access controller capable of handling high volume, high-speed traffic with host security management systems. Easily integrated with any reader via Fiber Optic or UTP Cat-5E tranmission and its P2000 software retains many of the same capabilities as others and can be programmed remotely or through its own interface. It allows you to intergrate with any other sub system with high-level interfacing.

Made from Johnson Controls U.S.A.

1. Up to 16 readers per panel.
2. Embedded 32 bit processor.
3. 32MB flash memory.
4. 10/100Base-T network or Fiber Optic connection.
5. DB9 port for configuration, commissioning and service maintenance.
6. 32MB memory for 100,000 cardholders.
7. Accepts up to 20-digit badge numbers.
8. 12 facility codes per reader (192 per panel).
9. 40 Holidays.
10. 64 Time zones.
11. 8 Access group/time zone pairs per badge.
12. Modem connection allows for additional redundancy features (CK721M only).
13. Wiegand, proximity, magnetic stripe, barium ferrite, smart card, most biometric readers and bar code card technologies are supported (custom engineered formats can also be accepted).
14. Time and attendance.
15. Alarm notification

Consumo energético: 330W

Condición: El artículo se entrega en funcionamiento y presenta el desgaste habitual de un producto usado.

Garantía: 24 meses

REF: RDR2S

Fabricante: Johnson Controls
Modelo: S300-DIN-RDR2S

Description
The S300-DIN-RDR2S module supports one or two doors per
module. It uses standard RS-485 communications and can interface
with the following controllers:
CK722
CK721-A
CK721
CK720/CK705
The S300-DIN-RDR2S, also referred to as the RDR2S, provides the
ability to configure supervised 4-state inputs and unsupervised
2-state inputs. A total of 10 inputs can be configured as supervised 4-
state inputs (normally open or normally closed), or 2-state inputs.
When interfacing to a single door, the unused points can be
configured as general purpose input/output (I/O) points, possibly
eliminating the need to purchase additional I/O modules for certain
installations.
The RDR2S provides power for card readers and door locking
hardware

Features
2-state (unsupervised) or 4-state (supervised) inputs –
Unsupervised inputs report either open or closed. Supervised
inputs provide two additional states that indicate tampering to an
external device.
Support of RS-485 bus communications at 9600 or 19200
baud – Improved performance with improved RS-458 bus polling
algorithm.
Easy installation – Modules be mounted on a flat surface, DIN
rail, or in available UL Listed enclosures.
Expandable modular design – RDR2S modules can be
connected together via RS-485.
Agency listing – The RDR2S is UL294 listed.

Operation
The RDR2S provides the following connections when configured to
control one or two doors:
Inputs – Request to exit devices, door position contacts, and
readers (PIN, card or biometric)
Outputs – Electric locking mechanisms, such as a strike, and
shunt alarm
Note: The RDR2S does not support 1-wire Wiegand signal or matrix
(row/column) keypads. Readers requiring these connection types are
still supported by the RDR2.
Power Requirements
The RDR2S requires 24 VDC input power and can draw as much as
1.5 amps (depending on the power requirements of the connected
devices). The RDR2S also requires a 2-wire RS-485 connection back
to the controller.
The RDR2S can provide 5, 12, or 24 VDC to the reader

Consumo energético: 24VDC

Garantía: 24 meses

REF: IBM2498B80A

Fabricante: IBM
Modelo: 2498-B80 ( SAN80B-4 )

Puertos activos: 80 Puertos
Fuentes de alimentación: 2 Unidades instaladas.
SW SFPS: Incluye 80 unidades de 4Gb SW Brocade 57-1000013-01

El equipo a sido de rack´s en funcionamiento y esta en perfecto estado. El Switch requiere de licencia a gestionar con el fabricante (cualquier duda consultar con el vendedor)

Condición: el Switch se entrega en funcionamiento.

Garantía: 24 meses

Especificaciones:

* 8 Gbps FC interfaces 1, 2, 4, and 8 Gbps auto-sensing FC ports
* Universal ports self-configure as E, F, M, or FL ports, and EX Ports. EX ports are activated on a per-port basis with the optional Integrated Routing license
* Unicast, multicast (255 groups), and broadcast data traffic types are supported
* ISL Trunking allows up to eight ports (at 1, 2, 4, or 8 Gbps speeds) between a pair of switches to be combined to form a single, logical ISL with a speed of up to 64 Gbps (128 Gbps full duplex) for optimal bandwidth utilization and load balancing
* Dynamic Path Selection optimizes fabric-wide performance and load balancing by automatically routing data to the most efficient available path in the fabric
* Extended distance support enables full performance for native FC extension with support of up to 3000 km for native FC
* Small Form-Factor Pluggable (SFP) optical transceivers support any combination of Shortwave (SW), Longwave (LW), and Extended Longwave (ELW) optical media on a single switch
* Fabric OS delivers distributed intelligence throughout the network and enables a wide range of value-added applications
* Optional value-added software offerings
* Utilization of the EZSwitchSetup wizard, which makes SAN configuration a three-step point-and-click task
* Extensive diagnostics and system-monitoring capabilities enhance RAS

Consumo energético: 84W típico, 91W máximo.

REF: IBM2498B80B

Fabricante: IBM
Modelo: 2498-B80 ( SAN80B-4 )

Puertos activos: 80 Puertos
Fuentes de alimentación: 2 Unidades instaladas.
SW SFPS: Incluye 80 unidades de 8Gb SW Brocade 57-1000117-01

El equipo a sido de rack´s en funcionamiento y esta en perfecto estado. El Switch requiere de licencia a gestionar con el fabricante (cualquier duda consultar con el vendedor)

Condición: el Switch se entrega en funcionamiento.

Consumo energético: 91W 

Garantía: 24 meses

Especificaciones:

* 8 Gbps FC interfaces 1, 2, 4, and 8 Gbps auto-sensing FC ports
* Universal ports self-configure as E, F, M, or FL ports, and EX Ports. EX ports are activated on a per-port basis with the optional Integrated Routing license
* Unicast, multicast (255 groups), and broadcast data traffic types are supported
* ISL Trunking allows up to eight ports (at 1, 2, 4, or 8 Gbps speeds) between a pair of switches to be combined to form a single, logical ISL with a speed of up to 64 Gbps (128 Gbps full duplex) for optimal bandwidth utilization and load balancing
* Dynamic Path Selection optimizes fabric-wide performance and load balancing by automatically routing data to the most efficient available path in the fabric
* Extended distance support enables full performance for native FC extension with support of up to 3000 km for native FC
* Small Form-Factor Pluggable (SFP) optical transceivers support any combination of Shortwave (SW), Longwave (LW), and Extended Longwave (ELW) optical media on a single switch
* Fabric OS delivers distributed intelligence throughout the network and enables a wide range of value-added applications
* Optional value-added software offerings
* Utilization of the EZSwitchSetup wizard, which makes SAN configuration a three-step point-and-click task
* Extensive diagnostics and system-monitoring capabilities enhance RAS

REF: 73541907A0

Marca: Cisco
Modelo: 73-5419-07
Tipo de dispositivo: Fast Ethernet Port Adapter Module

Estado del artículo: el artículo es usado y en buen estado de funcionamiento.

Garantía: 24 meses

REF: SAVAM2

Marca: Cisco
Modelo: SA-VAM2+ / 73-9571-06 A0
Tipo de dispositivo: VPN Acceleration Module
S/N: JAB110801BB

The Service Adapter VPN Acceleration Module 2 (SA-VAM2) is a single-width port adapter supported on the Cisco 7301 router and the Cisco 7200 series routers with the network processing engine 225 (NPE-225), 400 (NPE-400), G1 (NPE-G1), and the Network Services Engine (NSE-1) services accelerator. An SA-VAM2 provides hardware-assisted tunneling and encryption/compression services for Virtual Private Network (VPN) remote access, site-to-site intranets, and extranet applications, including security, quality of service (QoS), firewall and intrusion detection, and service-level validation and management. The SA-VAM2 offloads IPSec processing from the main processor to permit resources on the processor engines for other task

Estado del artículo: el artículo es usado y en buen estado de funcionamiento.

Garantía: 24 meses

REF: J4900B

Fabricante: HP
Modelo: J4900B
Forma: 1U
Cantidad de puertos: 24 Unidades.
Protocolo: Ethernet.
Compatibilidad: PC.

Overview The J4900B HP ProCurve 2626 switch has 24 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX); 1 RS-232C DB-9 console port; 2 dual-personality ports - each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base- TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or an open mini-GBIC slot (for use with mini-GBIC transceivers)

Benefits

• Dual-personality functionality: two 10/100/1000 ports or mini-GBIC slots for optional fiber connectivity such as Gigabit-SX, -LX, or -LH 13.6 Gbps (ProCurve 2650 and 2650-PWR)/9.6 Gbps (ProCurve 2626, 2626-PWR, 2600-8-PWR) backplane: wire-speed non-blocking architecture for low-latency throughput
• Basic IP routing: enables automatic routing to the connected VLANs and up to 16 static routes--including one default route--in IP networks
• Traffic prioritization (IEEE 802.1p): allows real-time ProCurve Switch 2600 series traffic classification into 8 priority levels mapped to 4 queues

Consumo energético: 15.4W por puerto

Condición: El Switch se entrega en funcionamiento y presenta el desgaste habitual de un producto usado.

Garantía: 24 meses

REF: FORCE10S2501GE24T

Fabricante: DELL

Modelo: FORCE 10 S25-01-GE-24T

Forma: 1U

Cantidad de puertos: 24 Unidades Gigabit

Protocolo: Ethernet.

Compatibilidad: PC.

Data transfer: 1000Mbps/1Gbps

Consumo máximo energético: 136W

Garantía: 24 meses

Juniper EX2200-48P-4G POE 48 Gigabit Ethernet Switch + 4 SFP

Fabricante: Juniper
Modelo: EX2200-48P-4G POE

Características:

Consumo: 130W

Garantía: 24 Meses

REF: EX2200A

1 x Force10 S50 48 Port Gigabit Ethernet Switch S50-01-GE-48T-AC 759-00056-03 AC/DC

1 x Power Cable

Description

Enclosure Type: Desktop - 1U

Width: 17.3 in

Subtype: Gigabit Ethernet

Depth: 16.7 in

Height: 1.7 in

Ports: 48 x 10/100/1000 + 4 x shared SFP

Weight: 14.33 lbs

Height (Rack Units): 1 m

Authentication Method: RADIUS, Secure Shell v.2 (SSH2), TACACS

MAC Address Table Size: 16K entries

Status Indicators: Port status, link activity, port transmission speed, power, status

Encryption Algorithm: MD5, SSL

Routing Protocol: OSPF, RIP, RIP-1, RIP-2, IGMPv2, IGMP, DVMRP, VRRP, OSPFv2, PIM-SM, IGMPv3

EXPANSION / CONNECTIVITY

Installed Modules Qty: (Max) 0 (installed) / 1 (max)

NETWORKING

Ports Qty: 48

Connectivity Technology: wired

Cabling Type: Ethernet 1000Base-T, Ethernet 100Base-TX, Ethernet 10Base-T

MAC Address Table Size: 16K entries

Remote Management Protocol: HTTP, Telnet, HTTPS, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 1, SNMP 2, SNMP 3

Features: ARP support, layer 2 switching, layer 3 switching, manageable, routing, BOOTP support, DHCP support, DiffServ support, IGMP snooping, SNTP support, VLAN support, auto-uplink (auto MDI/MDI-X), flow control

Compliant Standards IEEE 802.1D, IEEE 802.3ak, IEEE 802.3x, IEEE 802.3z, IEEE 802.1Q, IEEE 802.1ab (LLDP), IEEE 802.1ad, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.3ab, IEEE 802.3ae

Switching Protocol: Ethernet

Routing Protocol: DVMRP, RIP-2, VRRP, IGMP, IGMPv2, IGMPv3, OSPF, OSPFv2, PIM-SM, RIP, RIP-1

Status Indicators: link activity, port status, port transmission speed, power, status

CHASSIS

Installed Devices / Modules Qty: 0

Supported Devices / Modules Qty: 1

MISCELLANEOUS

Encryption Algorithm: MD5, SSL

POWER

Features: Redundant Power System (RPS) connector

Frequency Required: 50/60 Hz

Power Consumption Operational: 150 Watt

ENVIRONMENTAL PARAMETERS

Min Operating Temperature: 32 °F

Max Operating Temperature: 104 °F

Humidity Range Operating: 10 - 95%

REF: TLWA854RE

Diseñado para extender la cobertura y mejorar la intensidad de la señal de una red inalámbrica existente.

Marca: TP-LINK
Modelo:  TL-WA854RE

Características:
Muévelo a tus necesidades para aumentar la señal inalámbrica Wi-fi
Indicador con señal de luz para encontrar el lugar adecuado para colocar el extensor de alcance.
300Mbps velocidades de datos inalámbricos ideales para el streaming de vídeo, juegos en línea y llamadas por Internet
WEP 64/128/152-bit avanzada, WPA-PSK / WPA2-PSK encriptaciones a proteger su red contra amenazas a la seguridad

Consumo: 1W

Condición: Usado

Garantía: 24 meses

REF: MR33

Sistema con interfaz intuitiva basada en navegador que permite un despliegue rápido sin certificaciones ni demasiada formación en el área. Esto se debe a que el MR33 es autoconfigurable y gestionado a través de la web, y se puede implementar en una ubicación remota sin personal de TI in situ.

Marca: Meraki
Modelo: MR33-HW

Características:
Incluye puntos de acceso MIMO 2×2 802.11ac Wave 2, cuya misión es actualizar la red del cliente de Cisco Meraki con su tecnología quad-radio, dual band, con una velocidad de datos total de hasta 1,3 Gbps.
banda de frecuencia 2.4 y 5 GHz, 2×2 MU-MIMO 802.11ac Wave 2, velocidad máxima de 1.3 Gbps
velocidad de puertos de 10/100/1000 BASE-T Ethernet, para máximo 50 usuarios
antenas omnidireccionales integradas (ganancia de 3.8 dBi a 2.4 GHz, ganancia de 3.9 dBi a 5 GHz)
desde la nube es posible mantener el firmware actualizado, está diseñado para implementar en oficinas, escuelas, hospitales, tiendas, y hoteles.

Consumo: 1W aproximadamente.

Condición: Utilizado

Garantía: 24 meses

REF: WSC2960X48FPDL

Fabricante: Cisco

Modelo: WS-C2960X-48FPD-L + C2960X-STACK + Rackmount

Forma: 1U

Cantidad de puertos: 48-Port 10/100/1000 Ethernet Gigabit  / 2-Port SFP+ 10GbE

Protocolo: Ethernet + SFP+

Fuentes de alimentación: 1 Unidades de Fuente de alimentación. (740W MAX)

Incluye: Railes para enracar en rack.

Compatibilidad: PC y Servidores. 

Acceso a Consola: CONSOLA WS-C2960X-48FPD-L

Consumo energético: 740W MAX

Condición: El Switch se entrega en funcionamiento y presenta el desgaste habitual de un producto usado.

Garantía: 24 meses